For screen reader problems with this website, please call435-752-65644 3 5 7 5 2 6 5 6 4Standard carrier rates apply to texts.

Please read this important message if you are inquiring for Lynn’s Car Audio Center | Click Here for More Details »

Audio-Technica® AT-ART9 Dual Moving Coil Cartridge-AT-ART9-AT-ART9

Model #: AT-ART9
150115
Audio-Technica
At a Glance

Audio-Technica® AT-ART9 Dual Moving Coil Cartridge with solid boron cantilever and VC mold design

Call for Best Price
$1,095.00Save

Get to know this product.

Utilizing the same vibration system, neodymium magnet and permendur yoke as the AT-OC9/III MicroCoil™ cartridge, the AT-ART9 is designed to provide sound reproduction of the highest quality. The cartridge’s special line contact stylus, with a 40 µm × 7 µm curvature radius and a 0.26 mm diameter solid boron cantilever, enables an extremely accurate reading of the record groove and faithful transfer of the signal from the stylus tip to the magnetic coil. The VC mold design ensures stability and rigidity, while the dual moving coil (fashioned from high-performance PCOCC wire) offers excellent stereo separation and improved frequency response for long-lasting performance. The hybrid housing of machined aluminum and hard plastic, along with the machined aluminum base supporting the magnetic circuit and vibration system, reduces unwanted resonance and supports stable playback.

  • Premium magnetic core moving coil type cartridge
  • Builds on basic magnetic design of the limited-edition AT50ANV and vibration system of the AT-OC9/III
  • Special line contact stylus and solid boron cantilever with a 0.26 mm diameter
  • Neodymium magnet and permendur yoke significantly increase magnetic energy
  • PCOCC used for coils and terminal pins
  • Very high-quality magnetic circuit
  • VC mold design ensures stability and rigidity, limiting unnecessary coil movement and reducing distortion
  • Hybrid body of machined aluminum and hard plastic reduces unnecessary resonance
  • Machined aluminum base
  • High-separation, wide-response dual moving coil
Specifications

Additional Specifications

Frequency Response15-50,000 Hz
Channel Separation30 (dB at 1 kHz)
Vertical Tracking Angle23°
Vertical Tracking Force1.6-2.0 g (1.8 g standard)
Stylus ConstructionNude square shank
Recommended Load ImpedanceMin. 100 ohms
Coil Impedance12 ohms (1 kHz)
DC Resistance12 ohms
Coil Inductance25 µH (1 kHz)
Output0.5 mV (1 kHz, 5 cm/sec.)
Channel Balance0.5 dB (1 kHz)
Stylus ShapeSpecial line contact
Cantilever0.26 mm diameter solid boron
Static Compliance35 x 10-6 cm/dyne
Dynamic Compliance18 x 10-6 cm/dyne (100 Hz)
MountHalf-inch
Weight8.5 g (0.30 oz)
Dimensions17.3 mm (0.68") H × 17.0 mm (0.67") W × 25.6 mm (1.01") D
Accessories IncludedNon-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (12 mm × 2, 18 mm × 2); plastic protector; brush; PCOCC lead wire set

Misc. Specs

Product Weight0.0200
Width (in.)0.67
Depth (in.)1.01
Height (in.)0.68
Frequency Response15 - 50,000 Hz
Manufacturer Warranty1 Year
WarningProposition 65 Warning for California Residents