For screen reader problems with this website, please call435-752-65644 3 5 7 5 2 6 5 6 4Standard carrier rates apply to texts.
You don’t have to settle for wimpy, muddy sound just because you’re on the go. The AT-PHA100 Portable Headphone Amplifier is small (width and length comparable to a smartphone) but packs a powerful punch. Engineered using select audio components, and enclosed in all-aluminum casing to protect the circuitry, the AT-PHA100 gives headphones a rich, detailed boost throughout the sonic range with ultra-low distortion.
The AT-PHA100 is equipped with both analog and digital inputs (3.5 mm jack and USB micro-B, respectively) and 3.5 mm headphone jack. It also features a high/low gain switch, machined aluminum volume knob, and five-stage sampling indicator for digital input. The internal lithium polymer rechargeable battery lasts up to 14 hours when amplifying an analog signal, and up to 6 hours when amplifying a digital signal.
The amplifier comes with two rubber bands and a rubber mat for strapping the unit to a smartphone or other portable device, a 1.0 m USB cable (USB 2.0 to USB micro-B) and a 10 cm audio cable terminating in a 3.5 mm gold-plated stereo mini plug at each end.
|System Requirements||PC: with built-in USB port corresponding to USB 2.0|
|CPU||Intel Core2 CPU2.2 GHz or equivalent|
|RAM||32-bit OS 2 GB or more, 64-bit OS 4 GB or more|
|Supported OS||Windows XP (32-bit)*, Windows 7, Windows 8, Windows 8.1, Mac OSX Mavericks (10.9)|
|Corresponding Headphone Impedance||10 – 300 ohms|
|Maximum Output Level||100 mW + 100 mW (10% during 16 ohms, THD), 80 mW + 80 mW (10% during 32 ohms, THD), 10 mW + 10 mW (10% during 300 ohms, THD)|
|Frequency Characteristic||10 Hz – 100 kHz (-1 dB)|
|Signal-to-noise Ratio||110 dB (A-weighted)|
|Total Harmonic Distortion||<=0.001% (32 ohms 10mW output)|
|Input Connector||Analog: 3.5 mm (1/8") gold-plated stereo mini jack|
|Digital||USB (micro-B)/asynchronous mode/ DSD128 (DoP), DSD64 (Native / DoP): 24 – 32 bit/ PCM 384kHz, 352.8kHz, 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHz, 32kHz: 16 – 32 bit|
|Output Connector||3.5 mm (1/8") gold-plated stereo mini jack|
|Power Supply||5V DC, 500 mA bus power system (PC)/rechargeable lithium polymer battery (BATTERY)|
|Charging Time||Up to 10 hours (DC5V, 500mA)|
|Battery Life||Digital about 6 hours (JEITA) / analog about 14 hours (JEITA)|
|Operating Temperature||41 – 104° F (5° – 40° C)|
|Dimensions (excluding protrusions)||1.1" (27 mm) H × 3.0" (77 mm) W × 4.6" (116 mm) D|
|Weight||About 240 g|
|Accessories Included||1.0 m USB cable (USB 2.0 to USB micro-B), 10 cm audio cable (3.5 mm gold-plated stereo mini plugs x 2), rubber mat, two rubber bands|
|Common spec for analog/digital without annotation||Fs=384 kHz, 32-bit for digital input|
|Frequency Response||10 Hz – 100 kHz (-1 dB)|
|Manufacturer Warranty||1 Year|