For screen reader problems with this website, please call435-752-65644 3 5 7 5 2 6 5 6 4Standard carrier rates apply to texts.

Please read this important message if you are inquiring for Lynn’s Car Audio Center | Click Here for More Details »

Audio-Technica® AT4050 Multi-Pattern Condenser Microphone-AT4050

Model #: AT4050
151435
Audio-Technica
At a Glance

Audio-Technica® AT4050 Multi-Pattern Condenser Microphone with dual-diaphragm capsule design and transformerless circuitry

Call for Best Price
$699.00Save

People also viewed:

Get to know this product.

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050 exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity.

Check out audio samples and interior views of the AT4050 and other 40 Series side-address condensers

Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.

Audio-Technica’s AT4050. For performance that legends are made of.

  • Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
  • Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
  • The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • Three switchable polar patterns: omni, cardioid, figure-of-eight
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Custom shock mount provides superior isolation
Useful Documents
Specifications

Additional Specifications

ELEMENTExternally-polarized (DC bias) condenser
POLAR PATTERNSCardioid, Omnidirectional, Figure-of-eight
FREQUENCY RESPONSE20-18,000 Hz
LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY-36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE100 ohms
MAXIMUM INPUT SOUND LEVEL149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
NOISE17 dB
DYNAMIC RANGE (typical)132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS48V DC, 4.2 mA typical
SWITCHESPolar selection; Flat, roll-off; 10 dB pad (nominal)
WEIGHT18.0 oz (510 g)
DIMENSIONS7.40" (188.0 mm) long, 2.10" (53.4 mm) maximum body diameter
OUTPUT CONNECTORSIntegral 3-pin XLRM-type
ACCESSORIES FURNISHEDAT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
AUDIO-TECHNICA CASE STYLER1

Misc. Specs

Polar PatternCardioid/Figure-8/Omnidirectional
Type Of MicrophoneCondenser
Height (in.)7.40
Manufacturer Warranty5 Year
Microphone Intended UseStudio; Live
ApplicationStudio; Live
Frequency Response20 - 18,000 Hz
Connection TypeIntegral 3-Pin XLRM-Type
WarningProposition 65 Warning for California Residents