For screen reader problems with this website, please call435-752-65644 3 5 7 5 2 6 5 6 4Standard carrier rates apply to texts.

Please read this important message if you are inquiring for Lynn’s Car Audio Center | Click Here for More Details »

Audio-Technica Fully Manual Belt-Drive Turntable

Model #: AT-LPW30TK
343406
Audio-Technica
At a Glance

The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl.

Call for Best Price
$99,999.00Save $NaN

Get to know this product.

The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
  • Tonearm type: Static balanced straight aluminum pipe tonearm
  • Effective arm length: 223.6 mm
  • Overhang: 18.6 mm
  • Tracking error angle: <2 degrees
  • Applicable cartridge weight: 12-17 g
  • Stylus pressure adjustment range: 0-3 g
  • AC adapter: 12 V, 0.5 A
  • Replacement Stylus: AT-VMN95C
Useful Documents
Manual
Specifications

General

TypeBelt-drive manual turntable
MotorDC servo
Drive MethodBelt drive
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterDie-cast aluminum
Wow and Flutter< 0.15% WRMS (33 RPM) at 3 kHz
Signal-To-Noise Ratio>60dB
Output LevelPre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec, Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain35 dB nominal, RIAA equalized
Power Supply Requirements100-240V AC, 50/60 Hz, 0.5 A Max.
Power Consumption110 V 60 Hz, Working: 1.1 W, Motor off: 1.0 W, Power off: 0.1 W
Dimensions420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
Weight3.90 kg (8.60 lbs.) without dust cover
Accessories IncludedDust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3’)), AC adapter (approx. 1.5 m (4.9’)) (AD-SA1205WE), Dust cover hinges

Misc. Specs

Product Weight (lbs.)8.6
ColorLight Brown
Width (in.)16.53
Depth (in.)13.38
Height (in.)4.6
Signal to Noise Ratio60
Drive TypeBelt-Drive
Turntable Speed33-1/3 RPM, 45 RPM
WarningProposition 65 Warning for California Residents
Learn More