For screen reader problems with this website, please call435-752-65644 3 5 7 5 2 6 5 6 4Standard carrier rates apply to texts.
The most difficult task in designing SUB 1 and SUB 2 was not just to have these subs play lower and louder than any other subwoofers in the world, but to do so in a size that wouldn't dominate the average living room, and in a cabinet that could be mistaken for a very fine piece of furniture.
And then there are the mind-boggling specs. SUB 2 plumbs the depths to 7 Hz with bloodcurdling output: 112 dB at 10 Hz, 126 dB at 60 Hz (in room). Connected to a 240-volt line, SUB 2 delivers 4,500 watts of continuous RMS Sustained power and Frankenstein 9,000 watts of Dynamic Peak power through its unique Power Factor Correction system. Talk about bringing your music and movies to life! SUB 1 is no slouch either, delivering 1,700 watts of continuous power and 3,400 watts at peak.
With not one, but six cutting-edge drivers in each sub, transient information is conveyed with pristine clarity and perfect precision. Dynamics come through with lightning-fast speed and a power so shattering that it must be heard to be believed. Bass reproduction is eerily accurate and detailed, in large part a result of the unique Vibration-Canceling Design Architecture (VCDA)
Vibration-Canceling Design Architecture
Mineral-Filled Co-Polymer Polypropylene Cones
Overmolded NLC™ Non-Limiting Corrugated TPE Surrounds and Nomex® Cloth Spiders
RCR™ Resonance Control Ribs
Magnetic Pole Piece
High-Pressure Die-Cast Aluminum Chassis with AVS™ Airflow Ventilation System Cooling
3" (76 mm) 10-Layer Long-Travel Aluminum Voice Coils
Extruded Aluminum Center Heatsink
Computer-Optimized Ceramic (Hard Ferrite) Magnet Assemblies with Balanced Field Geometry
|Analog Audio(RCA) Input:||1|
|Bass Composition:||Mineral-Filled Polypropylene Cone|
|Driver Component Size:||10" x 6|
|Impedance:||RCA: 10k Ohms; XLR: 20k Ohms|
|Sensitivity:||100 mV Mono|